Securam Code Change
Securam Code Change
To Change Code
a) Enter “0” six times. Two beeps will sound, indicating the entry is valid and the system is awaiting the code change.
b) Next, enter the existing six (6) digit code. Two beeps will sound, indicating the entry is valid.
c) Enter the new six (6) digit code. One beep will sound, indicating the entry is valid.
d) Re-enter the new six (6) digit code. One beep will sound, indicating the codes entered in steps c and d are the same and the code changing process is successful.
e) If Three Beeps sound, the code change process has been unsuccessful. The existing code is still valid. Repeat steps a to d.
Note:
a) Verify the new code at least 3 times before closing the door to make sure the code has been programmed correctly.
b) The system will revert to standby status if there is no key press within 10 seconds. Standby status is indicated by two short beeps.